| Customization: | Available |
|---|---|
| Logo Printing: | Can Choose It |
| Size: | Small |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2.2KW water cooled CNC spindle motor
1. Imported bearings; bearings with dust cover, more secure
2. Using grinding process, can improve spindle motor concentricity and prolong life
3. Water-cooled motor, sculpture forceful, high precision, long life
Specfications
Feature of spindle motor:
1.Reasonable structure desgin ,simple and compact configuration ,easy to take apart.
2.High precision.high inflexibility ,high efficiency,long operation life.
3.With high grade size .shape,.position precision,and quality of surface .
4.Enough abrasive resistance ,vibration resistance,stable size.
5.Work stable ,low noise,enough fatigue strength
|
Model |
GDZ-80-2.2B |
|
Rev(rpm) |
24000 |
|
Power(kw) |
2.2KW |
|
Voltage(V) |
220V(380V also in stock) |
|
Current(A) |
8 |
|
Frequency(HZ) |
400 |
|
Cool type |
water cooling |
|
Diameter(mm) |
80 |
|
Lubricate |
Grease |
|
Bearing |
7005C P4*2 DT 7002C P4*1 |
|
Collet(mm) |
ER20 (standard size:6mm diameter) |
|
CNC tool |
1-13(mm) |
|
Repair time |
Bearing(one year), spindle(one year) |
|
Size |
80mm*213m |
|
Collet(mm) |
ER20 (standard size 6mm diameter) |
Main spindle motor,So if u need other spindle motor.you also buy them from me.
1.water cooled spindle motor:300w,800w,1.2kw,1.5kw,2.2kw,3kw,4kw,3.2kw,4.5kw,5.5kw
2.air cooled spindle motor: 800w,1.5kw,2.2kw.3.5kw,4.5kw,6kw,7.5kw,12kw
3.air cooled ATC spindle motor:4.5kw,7.5kw,9kw
4.water cooled ATC spindle motor:1.5kw,2.2kw,5.5kw,6kw,7.5kw
We can provide all the spindle motor parts if you have more needs. We can give you more advice
SICHUAN FOCUS SCIENCE AND TECHNOLOGY CO., LTD.
SICHUAN FOCUS SCIENCE AND TECHNOLOGY CO., LTD is pressional and technology manfacture of high speed spindle motor. with 20 years production experience.
Our main spindle motor are water cooled spindles, air cooled spindles, ATC spindles, and edge bander spindles. Our products are widely used in grinding, Engraving, CNC drilling machine.
We welcome your coming at any time for bussiness cooperation.
1.Spindle Common Problems and Solutions
| Malfunction | the reason | Method of exclusion |
| After the boot does not run the spindle | 1. The inverter has no output or is set incorrectly | Check that the inverter output device is correct |
| 2. The plug is not connected | Check the plug and wiring | |
| 3. The connection is not good | ||
| 4. Stator wire package burned | Replace the line pack | |
| Turn on the machine after a few seconds | 1. Water damage line pack insulation | Drying line package |
| 2. High temperature caused damage to the line package insulation | Replace the line pack | |
| 3. Phase loss operation causes overcurrent protection | Check the motor connection | |
| 4. Start time is too short | Extend the acceleration time | |
| A few seconds after the start of the motor smoke or shell hot | 1. The inverter has no output voltage, frequency and spindle nameplate voltage, frequency does not match | Check the reference frequency of the inverter |
| 2. The inverter setting is incorrect | Reset the drive | |
| 3. Waterway problems | Check whether the waterway is smooth | |
| The nut is loose when starting | The rotation direction is wrong | Change the direction of rotation by nameplate |
| Noise and vibration | 1. bearing wear serious | Replace the bearing |
| 2. Parts of the impact of damage to the dynamic balance | Check the balance | |
| 3. Spindle beating large | Replace the spindle | |
| The nut is loose when stopped | Downtime is too short | Extend the time to reduce |
2.FAQ
How about the warrantly about your company?
bearings=half a year, other parts a year
Which kinds of bearing you are using?
It will according to your order. We have different price range for you with different bearing.
Do you have other spare parts for spindle motor, just like gripper, VFD, collet ?
We have all kits.And we can let engineers help you to program them.
Can I visit your factory?
Yes, welcome to our factory.
Do you have installation page?
Yes,we have.
Can you show me the inspection report ?
Yes We will send you inspection report of spindle after you send me full money before despatch.
The reasen is that I'm not sure which spindle will be sent to you.Every spindle have it's inspection report .And they are different in details.Only if you pay the money,we can decide which spindle to deliver you.
We have two packaging methods for spindle motor
1. Low-power spindle motor is generally used in paper boxes
2 automatic tool change and high power spindle motor used in wooden boxes
){kind=link}