Genuine Airtac Pneumatic Air Speed Regulating Joint Throttle Valve Asl4/6/8/10

• Customization: Available
• Customized: Customized
• Number of Cylinders: Throttle Valve
• Model NO.: ASL4/6/8/10
• Type: Throttle
• Usage: Air transport Screwdriver, Impact Wrench, Air Drill, Grinding Machinery, Air Compressor, Air Line
• Brand: Airtac
• Work Temperature: Normal Temperature
• Material: Plastic
• Model No.: Asl4/6/8/10
• Application: Industrial Usage, Water Industrial Usage, Househol
• Pressure: Ordinary Pressure
• Power Supply: Throttle Valve
• Standard: DIN
• Transport Package: Boxes
• Specification: 50000PCS/Year
• Origin: Taiwan China

Product Description

Order code

Product feature
1.Stainless steel 304 material can be used in prohibiting copper condition.
2.The silencer is small size and lightweight with small installation space.
3.Excellent flow charatentics high sensitivity and easy to adjust.
4.The silencer brass body adopts a special nickel-plating process which has good corrosion resistance and anti pollution property.
5.Anti-drop structure is designed on the regulating rod.
6.The sealant being coated on threaded portion can ensure no leakage of the threaded connection part.
7.The inserting direction of universal speed controller can be adjusted in 360°.

Specification

Operating pressure range		0~10kgf/cm^2(0~1.0MPa)
Negative pressure		-750mmHg(10Torr)
Proof pressure		1.5MPa
Ambient and fluid temperature		-20~70
Applicable tubing		Soft nylon or polyurethane
Colour		Grey/black

 Installation and removal of tubing
1.tInsiallation of tubing,Grasp the tubing and slowly push it into the fitting until itcomes to a stopThe tubing wil be locked by the spring gasket.
2.Remowal of tubing,Push the release button to open the sprng gasket so that the tubing can be released Note:When remove the tubing. make sure the pressure in the tubing is Zero.
3.Mounting of the speed controller.Mount the speed controber into the inlet and outlet port of the cylinder with a wrench Note: Piease refer to the fittings for the tiahtening torgue and threed screw-in deoth Operation.
4.Adjustment of the cylinder speed.Make sure the speed controller is turned off before applying air pressure.The cylinder may flyout due to the high speed if the air is inlet when the speed controller is tumed on.
5.Adjust the speed by opening the needle slowly from the fully closed state.When aneedle vaive is turned clockwise, the air flow through is reduced and the actuator speed decreases.When a neede vaive is turned counter-clockwisethe eir fow through is increased and the actuator speed increases.
6.Operation of the speed controller.
7.Do nat use tools such as plers to rotate the handle.Do notapply excessive forceor shock when the neede is at the place of top or bottom. it can cause damace or airleakage.
8.Acertain amount of leakage is atlowed in the closed state ofthe speed contraller.it is not designed for the use as stop valve with zero air leakage.