| Customization: | Available |
|---|---|
| Accuracy: | ± 0.002 G /Cc (± 2 Kg/M3) |
| Maximum Measurement Range: | 0.5 – 2.5 G /Cc (500 – 2500 Kg/M3) |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HDM301 tuning fork densitometer is installed by plug-in type, which is widely applicable to the detection of medium density in pipeline, open tank container and closed tank container. The fluid density directly depends on the vibration frequency received by the tuning fork when the sensor is inserted into the medium. The built-in temperature sensor provides temperature compensation for the sensor. Application: petrochemical industry, brewing industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonate, silicate, etc.), specifically applied to the interface detection of multi product pipeline in the above industries, density detection of mixing mixture, end point monitoring of reactor, interface detection of separator.
|
Measuring range
|
0.5 - 2.5 g /cc (500 - 2500 kg/m3)
|
|
Calibration range
|
0.5 - 2.5 g /cc (500 - 2500 kg/m3)
|
|
measurement accuracy
|
± 0.002 g /cc (± 2 kg/m3)
|
|
Repeatability
|
± 0.0002 g /cc (± 0.2 kg/m3)
|
|
Operating temperature range
|
-50ºC ~ +200ºC
|
|
Maximum working pressure
|
207 bar (3000 psi)
|
|
Fluid viscosity range
|
0 - 20000 cP
|
|
Temperature Coefficient
|
Less than 0.1 kg/m3/°C (after correction)
|
|
Pressure effect
|
Negligible
|
|
Built-in temperature sensor
|
Digital sensor
|
|
Wetted material
|
316L stainless steel Hastelloy
|
|
Fork body coating
|
Standard type, PTFE or electrolytic polishing
|
|
Power supply
|
24VDC, ≥50 mA
|
|
Analog signal output
|
4 -20 mA,0-1000Hz,RS485 Modbus RTU
|
|
Output accuracy (20 ° C)
|
± 0.1% of reading or ± 0.05% FS
|
|
Output repeatability (-40 ~ +85 ° C)
|
± 0.05% FS
|
|
Process connection
|
ANSI 150 ~ 1500 RF
DIN 50 PN16 DIN 50 PN40 IDF and RJT Hygienic |
|
Protection level
|
IP65
|
|
shell
|
Aluminum alloy
|
Q: How long will you give me the reply?
A: we will contact you in 1 hours as soon as we can.
Q:Could I visit your factory?
A: Sincerely invite you to visit our factory.
Q: Do you provide samples ?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping
to you . We have the certification of ISO,CE we could send the certification test of our company to you
Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU ,Credit Assurance
Q: What is the warranty for your product ?
A: Warranty: 1 years, Lifetime maintenance
){kind=link}