| Customization: | Available |
|---|---|
| Customized: | Non-Customized |
| Certification: | ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Oder code
Specification:
| Bore size: | 20 | 25 | 32 | 40 | 50 | 63 | |
| Acting type: | MSBL,MTBL | Single Acting | |||||
| MBL,MBLD,MBLJ | Double Acting | ||||||
| MBLC,MBLCD,MBLCJ | Double Acting with Cushion | ||||||
| Fluid: | Air(to be filtered by 40μm filter element) | ||||||
| Operating Pressure: | Double Acting | 0.10~1.0MPa(15~145psi)(1.0~10.0bar) | |||||
| Single Acting | 0.2~1.0MPa(28~145psi)(2.0~10.0bar) | ||||||
| Proof pressure: | 1.5MPa(215psi)(15bar) | ||||||
| Temperature(ºC): | -20~70 | ||||||
| Speed rang (mm/s): | Double Acting:30~800 Single Acting:50~800 | ||||||
| Stroke tolerance: | 0~150(0~+1.0) >150(0~+1.5) | ||||||
| Cushion Type: | MBLC, MBLCD,MBLCJ:Adjustable Cushion other:Bumper | ||||||
| Port Size: | PT1/8 | PT1/4 | |||||
Stroke:
| Bore size(mm) | Standard Stroke(mm) | Max.std Stroke(mm) | Max Stroke(mm) | |
| MBL MBLC |
20/25 | 10 15 20 25 30 40 50 60 75 80 100 125 150 150 160 175 200 250 300 350 400 450 500 | 500 | 800 |
| 32/40 | 10 15 20 25 30 40 50 60 75 80 100 125 150 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | |
| 50/63 | 10 15 20 25 30 40 50 60 75 80 100 125 150 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | |
| MBLD MBLJ MBLCD MBLCJ |
20/25 | 10 15 20 25 30 40 50 60 75 80 100 125 150 150 160 175 200 250 300 | 300 | - |
| 32/40 | 10 15 20 25 30 40 50 60 75 80 100 125 150 150 160 175 200 250 300 350 400 450 500 | 500 | - | |
| 50/63 | 10 15 20 25 30 40 50 60 75 80 100 125 150 150 160 175 200 250 300 350 400 450 500 | 500 | - | |
| MSBL | 20/25 | 10 15 20 25 30 40 50 60 75 80 100 125 150 | - | - |
| 32/40 | 10 15 20 25 30 40 50 60 75 80 100 125 150 | - | - | |
| MTBL | 20/25 | 10 15 20 25 30 40 50 60 75 80 100 | - | - |
| 32/40 | 10 15 20 25 30 40 50 60 75 80 100 | - | - | |
Product feature
1. Manufactured by our enterprise.
2. Riveted structure is adopted to connect front and bak cover and cylinder tube to make it credibility.
3. Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation.
4. There are several modes of back cover, which makes the installation of cylinder more convenient.
5. There are cylinders and mounting accessories with several specifications for your choice.
Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. To avoid side load, otherwise, piston rod will be bent and deformed and damage the thread at the end of the rod. Single-acting type can not be added in return;
8. If the cylinder is dismantled and stored for a long time, please to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
){kind=link}