| Customization: | Available |
|---|---|
| Customized: | Non-Customized |
| Certification: | ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Oder code
Specification:
| Bore size: | 10 | 16 | 20 | 25 | ||
| Acting type: | Double Acting,Single Acting | |||||
| Fluid: | Air(to be filtered by 40μm filter element) | |||||
| Operating Pressure: | Double Acting: | Φ10: | 0.20~0.7MPa(28~100psi)(2.0~7bar) | |||
| Other: | 0.15~0.7MPa(22~100psi)(1.5~7bar) | |||||
| Single Acting | Φ10: | 0.35~0.7MPa(50~100psi)(3.5~7bar) | ||||
| Other: | 0.25~0.7MPa(36~100psi)(2.5~7bar) | |||||
| Temperature(ºC): | -20~70 | |||||
| Lubrication: | Not Required | |||||
| Repeatability(mm): | ±0.01 | |||||
| Max Frequency: | 120(c.p.m) | |||||
| Sensor Switches: | DMSH(S)/CMSH | DMSG(S)CMSG, MSH(S)/CMSH | ||||
| Port Size: | M3X0.5 | M5X0.8 | ||||
Product feature
1,Six kinds of bore size , three kinds of type and Seven kinds of finger type.2,Integrated design of linear guide roller, high rigidity and high precision.
3,A positioning pin is attached to the bottom of the linear guide rail, which can prevent the deviation of the positioning rail and body.
4,The squareness magnetic switch slots convenient to install DS1-G\CS1-G type inducting switch.The roundness magnetic switch slots convenient to install DS1-H type inducting switch.Can be mounted from three directions:With mounting holes on the side and tail.
5,With positioning hole:
The positioning hole can improve the precision and the consistency of repeated dismounting and positioning.
){kind=link}